How It's Done
First, the edges of the bed are skillfully masked.
|
Second, the entire truck is covered to protect from overspray.
|
The bed is wiped with a grease and wax remover and then scuffed.
|
The material is applied using either a low or high pressure system. In either case, the material drys quickly.
|
Finally, the masking is removed. While the material quickly drys it takes 24 hours or so before it is ready for heavy use.
|
|
Select an item below to get a price quote, find out if the store nearest you has a system, or to ask a question.
|
|
|
Over half of the 50 Leonard Factory Outlets have spray-in capability. In each of these locations, Leonard has trained technicians with plenty
of experience. The spray booths are carefully designed to produce a good-looking and reliable finish. The material creates a near 100% bond to almost all
surfaces. It is environmentally safe, no VOC's or CFC's. The liner will withstand temperatures of up to 350F degrees. It is rugged, skid resistant and can
be repaired easily.
Return to previous page
|
