Utility Trailers

Utility Trailers

Utility Trailers

 

Leonard utility trailers are designed by Pros for the Pros. Compare the quality and you will see heavier construction material, better welds, and design features that make a lot of sense. We have designed our wood floor systems so that boards can be replaced. Sounds obvious, but many manufacturers weld the plates at the end so that it is virtually impossible to replace a board. You will find that Leonard trailers have removable plates and each board is fastened to the frame using high quality screws. 

 

Browse Utility TrailersSTART A FINANCE APPLICATION

TANDEM AXLE HIGH SIDE TRAILERS - 7,000 LBS

 

  • Heavy Duty Frame: 3"x4"x1/4" with 2"x3"x3/16" angle cross members
  • Heavy Duty Tongue: 3 Piece Wrap-Around 4" channel 3"x3"  square tube
  • High side walls: 24" side wall with thick gauge metal mesh
  • Strong 4' Gate with slam latch system and side handles - allows you to close the gate with one hand

TANDEM AXLE LOW SIDE TRAILERS - 7,000 LBS

 

  • Heavy Duty Frame: 3"x4"x1/4" with 2"x3"x3/16" angle cross members
  • Tongue:  2 Piece Wrap-Around 4" Channel
  • Sturdy side walls: 13.5" open rail side walls ready to tie anything down
  • Strong 4' Gate with slam latch system and side handles - allows you to close the gate with one hand

SINGLE AXLE HIGH SIDE TRAILERS

  • Heavy Duty Frame: 2"x3"x3/16" angle with 2"x2"x1/8" or 3/16" angle cross members
  • Beefy Tongue:  3 Piece Tongue - A-frame made of 2"x3"x3/16" angle with 3"x3" sq. middle tube
  • High side walls: 24" side wall with thick gauge metal mesh
  • Strong 4' Gate with tipper slam latch system and side handles - can close the gate with one hand
  • Heavy Duty SWING away jack for easy positioning

SINGLE AXLE LOW SIDE TRAILERS

Our single axle low side trailers come in a variety of sizes ranging from 5x8 up to 6x12.

6' 4" X 12' HIDE SIDE UTILITY TRAILER

 

  • 3" Channel A-Frame Tongue
  • 3" x 2" x 3/16" Angle Main Frame
  • 2" x 2" Angle Top Rail
  • 2" A-Frame Coupler with Safety Chains
  • 2000 lb. rated swing-up jack - 3,500 lb. rated EZ lube axle
  • 2,990 lb. GVWR
  • 3 leaf springs
  • ST205x15 tire and wheel assemblies
  • white mod wheels - steel round fender with back
  • treated wood floor
  • 72"W x 49" H rear ramp gate
  • LED lights

6' 4" X 16' HIGH SIDE UTILITY TRAILER WITH TANDEM AXLE AND A GVWR OF 7,000LB

  • LED lights
  • 72"W x 49" H spring assist rear ramp gate - wrapped tongue
  • electric breakaway kit with charger
  • treated wood floor
  • steel round fender with back
  • white mod wheels
  • ST205x15 tire and wheel assemblies
  • 3 leaf springs
  • 7,000 lb. GVWR
  • 3,500 lb. rated EZ lube brake axle
  • 3,500 lb. rated EZ lube axle
  • 2000 lb. rated top wind jack
  • 2-5/16" A-Frame Coupler with Safety Chains
  • 2" x 2" Angle Top Rail
  • 3" x 2" x 3/16" Angle Main Frame
  • 4" Channel A-Frame Tongue
Leonard single axle high side trailer. Size is 6 x 12 being used to tow a couple of ATVs!
Utility 5x8 Trailer

TRLU-0508LEO-180C

 

Leonard utility trailers are designed by Pros for the Pros. Compare the quality and you will see heavier construction material, better welds, and design features that make a lot of sense. We have designed our wood floor systems so that boards can be replaced. Sounds obvious, but many manufacturers weld the plates at the end so that it is virtually impossible to replace a board. You will find that Leonard trailers have removable plates and each board is fastened to the frame using high quality screws.

Reserve This Trailer

Our customer is using a Leonard 5x10 model 152 to haul tow motorcycles.

Open Trailers

SINGLE AXLE TILT TRAILERS

10" Open Rail

Browse Tilt Trailers

 

get the latest deals & more...